Electronic Grade Cleanser Product Guide
PRECISION SURFACE PREPERATION
A fast-evaporating, acetone-based cleanser formulated for targeted electronics cleaning and surface preparation before thermal material application.
Clean the Surface.
Prepare for the Next Step.
PolarTronix Electronic Grade Cleanser is an acetone-based, fast-evaporating cleaning solution designed for targeted electronics cleaning and surface preparation. It is intended for professional repair workflows where old thermal material, residue, oils, or other contamination must be removed before inspection or application of a new thermal interface material.
Start With a Clean Contact Surface.
Old thermal compound, oils, residue, and contamination can interfere with inspection and the installation of fresh thermal materials. Proper surface preparation creates a cleaner, more controlled starting point for the repair.
Precision Application
Designed for controlled cleaning of localized electronics work areas rather than broad, general-purpose cleaning.
Fast-Drying Formula
The acetone-based formulation evaporates quickly when used appropriately for efficient surface-preparation workflows.
Before Thermal Materials
Useful for preparing compatible CPU, GPU, APU, and heatsink surfaces before applying new thermal interface materials.
Repair Bench Ready
Intended for professional electronics repair, thermal-service, and controlled engineering workbench environments.
Electronic Grade Cleanser is acetone-based and should not be assumed compatible with every material in an electronic device. Verify compatibility before use and avoid unnecessary contact with plastics, coatings, adhesives, labels, painted surfaces, or other materials that may be affected.
Targeted Cleaning.
Professional Surface Prep.
PolarTronix Electronic Grade Cleanser is designed for targeted cleaning of compatible electronics and thermal-contact surfaces, especially when preparing a device for new thermal interface material or detailed inspection.
CPU Surface Preparation
Useful for removing compatible residue and contamination from processor and mating heatsink surfaces before new thermal material is applied.
GPU Cleaning
Supports controlled cleanup around compatible GPU thermal contact areas during repaste, inspection, and repair workflows.
Console APU Service
Suitable for controlled cleaning of compatible APU and heatsink contact surfaces during console thermal-service procedures.
Heatsink Preparation
Helps clean compatible metal contact surfaces before reassembly and application of fresh thermal interface materials.
Targeted PCB Cleaning
Can be used for localized electronics cleaning where the board materials and surrounding components are compatible with the acetone-based formulation.
Electronics Repair
A useful surface-preparation consumable for professional repair benches servicing computers, consoles, and other electronic assemblies.
Built Around Thermal Service
The cleanser fits naturally into repaste and liquid-metal service workflows where old material must be removed and the compatible thermal-contact surface inspected before fresh material is installed.
Controlled Application Matters
Apply only where needed and avoid flooding the device. Because the formulation is acetone-based, keep it away from materials that have not been confirmed compatible.
Acetone can damage or alter certain plastics, coatings, adhesives, labels, painted finishes, and other materials. Use the cleanser only on surfaces confirmed compatible with the product and the repair procedure.
Controlled Cleaning.
Step by Step.
Use PolarTronix Electronic Grade Cleanser as a targeted surface-preparation product. Apply only the amount needed for the work area, keep the cleaner away from incompatible materials, and allow the surface to dry completely before continuing.
Identify the Work Area
Confirm the surface to be cleaned is appropriate for the acetone-based formulation and keep surrounding sensitive materials protected from unnecessary contact.
Use a Controlled Amount
Apply a small, controlled amount for the targeted cleaning area. Avoid saturating or flooding the electronic assembly with cleanser.
Remove the Residue
Gently clean the compatible surface using an appropriate lint-free cleaning material until the unwanted residue or contamination has been removed.
Allow Full Evaporation
Allow the work area to dry completely, then inspect the surface before applying new thermal material or continuing with the repair.
Less Liquid.
More Control.
Electronics cleaning does not require flooding the work area. A controlled amount of cleanser combined with an appropriate cleaning material gives the technician better control over where the acetone-based formula contacts the device.
Check Material Compatibility
Acetone can affect certain plastics, coatings, adhesives, labels, painted finishes, and other materials. Verify compatibility before allowing the cleanser to contact surrounding surfaces.
Make Sure It Is Dry
Do not apply thermal interface material or reassemble the cleaned area while it is still wet. Allow the cleanser to evaporate completely before proceeding.
Know the Surface.
Clean With Control.
Electronic Grade Cleanser is an acetone-based formulation. While that makes it useful for targeted surface preparation, acetone can also affect certain materials commonly found inside electronic devices. Always consider the complete work area, not only the surface being cleaned.
Compatible Surface Cleaning
The cleanser is best used as a controlled cleaning and surface-preparation product where the materials being contacted have been confirmed compatible with the formula.
- Compatible metal thermal-contact surfaces
- CPU and heatsink contact areas where appropriate
- GPU and heatsink contact areas where appropriate
- Compatible console APU and heatsink surfaces
- Localized electronics cleaning on confirmed compatible materials
Sensitive Materials
Do not assume that every material surrounding a processor, heatsink, PCB, or electronic assembly will tolerate acetone exposure.
- Plastics and plastic housings
- Painted or finished surfaces
- Adhesives and adhesive-backed materials
- Printed labels and markings
- Protective coatings and other unknown materials
Verify Before Contact
If the compatibility of a material is unknown, do not assume it is acetone-resistant. Check the equipment manufacturer’s guidance or verify compatibility before exposing the material to the cleanser.
Controlled Handling
Keep It Localized
Apply only where cleaning is required rather than spreading cleanser across surrounding components.
Avoid Flooding
Use a controlled amount of cleanser and avoid unnecessarily saturating the electronic assembly.
Allow to Dry
Allow the cleaned area to dry completely before applying thermal materials or continuing reassembly.
Check the Area
Inspect the surrounding work area before continuing to confirm the surface is clean and dry.
Follow the product label and applicable safety documentation when handling, storing, and using Electronic Grade Cleanser. This product should be used only for its intended cleaning and surface-preparation applications.
Technical
Specifications.
A compact electronics cleaning solution designed for controlled, targeted use during professional repair, thermal-service, and surface-preparation workflows.
Electronic Grade Cleanser
Compact professional cleaning solution for targeted electronics cleaning and thermal-contact surface preparation.
Acetone-Based
Formulated around acetone for targeted professional cleaning and surface-preparation applications.
Fast Evaporation
Designed to evaporate quickly when applied appropriately during controlled cleaning workflows.
Targeted Use
Intended for localized application rather than flooding electronic assemblies or surrounding materials.
Repair Bench Ready
Designed to fit professional electronics repair and thermal-service workflows.
Handling & Storage
Follow the product label and applicable safety documentation for proper handling and storage. Keep the container closed when not in use and verify material compatibility before application.
Clean With Precision.
Prepare With Confidence.
Targeted electronics cleaning and surface preparation designed for professional repair, thermal service, and controlled electronics workbench applications.